Re: [stag] Alternator
J Kuipers Wrote: ------------------------------------------------------- > I do know that an alternator from a Euro spec Ford > Focus (probably a certain year) fits plug'n'play. With respect, I...
View ArticleRe: [stag] Alternator
Most important not to tolerate excess charge voltage. Some devices will fail under this condition, in particular some electronic fuel pumps. Modern Batteries are uncomfortable with this as well. In...
View ArticleRe: [stag] Clutch Throw out bearing
I do not think the throw out bearing is at fault. It seems to me the bearing has been in constant contact with the fingers on the Clutch cover. If it is just lightly in contact it will not turn. It...
View ArticleRE: [stag] Alternator
I am currently changing out my alternator for a Bosch. I have an MKI so I am removing the control box and relay, and rewiring the alternator as per instructions from Dave Lawrence who has done this...
View ArticleRe: [stag] Power Steering
If you can pull a tranny I think you can rebuild a rack. You need a big vice, to grip the rack when removing the housing. You also need to make a special c shaped notch gripping wrench to grab and...
View ArticleRE: [stag] Alternator
Yes please several pictures and worth several thousand words. PeterH
View ArticleRe: [stag] oh crap , dizzy
Try turning the crankshaft by using a large pipe wrench or stilson on the back shank of the front engine pulley. that rotates the gears a little and may provide some upward force. PeterH
View ArticleRe: [stag] Alternator
Sorry all Randall is correct. I forgot to mention the need to change wiring. To upgrade a Mk1 alternator it is by far the best solution to change the wiring and then you can fit the Bosch Ford unit....
View ArticleRE: [stag] Power Steering
I would go right to these folks. They rebuilt my TR8 rack, and I know they've done several Stags already: [www.aaesteering.com] ~Rand > Date: Sat, 13 Jul 2013 14:26:21 +0100 > From:...
View ArticleRe: [stag] Clutch Throw out bearing
So what does the flywheel look like if the locating pins were dislodged? Damaged at all? That's some fine quality parts right there. :) Sent from my iPhone On Jul 12, 2013, at 8:30 PM, "Patrick Baize"...
View ArticleRE: [stag] Clutch Throw out bearing
> It seems to me the bearing has been in constant contact with > the fingers on the Clutch cover. I believe that is actually the original design, on a Stag (and TR6). The bearing is supposed to...
View ArticleRe: [stag] oh crap , dizzy
Another silly option. Remove oil pump and push up from below with a pipe -------------------------------------------------------------- Sujit Roy Realtor Altas Realty, Direct: (408) 839-8359 Email:...
View ArticleRe: [stag] Clutch Throw out bearing
Fly wheel was ok, but I had it resurfaced anyway. When I put the pressure plate back on, I'm gonna tac a weld on the pins Patrick 71 Stag ----- Original Message ----- From: "Bert Saxby"...
View ArticleRe: [stag] Alternator
In reply to Randalls comment, mine has had the wiring adapted to take the MkII system. Julian
View ArticleRe: [stag] Clutch Throw out bearing
When I did my clutch, I bought drill rod of the appropriate size and threaded the 2 ends for a nut. So far, so good. John Mitchell 76 TR6 72 Stag On 7/13/2013 4:46 PM, Patrick Baize wrote: > Fly...
View Articlealternator swap problem
Hi Bought a new alternator for Mk2 65amp and find when removed that the new one does not have aspade terminal for the lone brown wire connection, any suggestions how to modify to accepr the fourth wre...
View ArticleRe: [stag] alternator swap problem
I don't think you need it. If the alternator doesn't have battery sensing then you don't all you need is three wires from the Europlug Peter H
View ArticleRE: [stag] alternator swap problem
> I don't think you need it. > > If the alternator doesn't have battery sensing then you don't > all you need is three wires from the Europlug > > Peter H I believe that is correct....
View ArticleRe: RE: [stag] alternator swap problem
Many thanks, while I have the inlet manifold out I thought I would tackle the alternator upgrade, new brake servo, so by the time I'm finished should be spot on, the old alternator although...
View Article[stag] O/D wiring question
My 1973 Stag came with a four-speed non-O/D gearbox. I am installing a J-type overdrive. I bought from Rimmer Bros. an overdrive gearbox wiring harness. It fits the plug on the car. However, I wonder...
View Article
