Re: [stag] Rotor Arm Advice - Long Rant
Is it possible that I didn't push the rotor arm right down on to the spindle, and if so, is it likely that this would only manifest in fracture after a few hundred miles? IF THE HOLE in the rotor arm...
View Article[stag] Stag makes Hemmings Find of the Day
For those of you who might not have seen it, a Triumph Stag made Hemming's Daily's Find of the Day, complete with at least one troll posting a comment. See it at: [blog.hemmings.com] --...
View ArticleRe: [stag] Rotor Arm Advice - Long Rant
Hello Peter Many thanks for your comments. I don't think the problem has returned, and Yes, I do have an old Lumentiton Optronic system. I don't know if the spark is weak when it's hot, but sometimes...
View ArticleRe: [stag] Cooling
I meant to reply to this earlier. I had to remove my front grille a couple of weeks ago to recement the Stag Badge. What a lot of muck / grass / flies / seeds etc. in the radiator! I'm convinced it's...
View ArticleRe: [stag] Stag makes Hemmings Find of the Day
It will be interesting to see if they get the asking price of $24,900.00
View ArticleRe: [stag] Stag makes Hemmings Find of the Day
b?I was thinking the same thing. The asking price is top of the market for a car in a less desirable color. It looks nice in the photos, but in the flesh, cars can look very different. Sent from my...
View ArticleRe: [stag] Rotor Arm Advice - Long Rant
I had a problem with a bosch rotor arm years ago. The old one was hard plastic and looked very "professional" - ie, the conductor was brass, shaped and set into the hard plastic. Seeing it was hard...
View Article[stag] Stag Digest Advertisers: regular posting
For information on how to support the stag-digest with advertising, contact Richard Welty, rwelty@krusty-motorsports.com If you are a subscriber who wishes to help support the list, contributions may...
View Article[stag] administrivia: notes on using this list
Digest.Net mailing list "Meta FAQ" These general notes on using Digest.Net mailing lists are posted on the 1st and 15th of each month. This file may be found on the web at [www.digest.net] [last...
View ArticleRe: [stag] Rotor Arm Advice - Long Rant
Yes, I agree with Ken H. Around 2008, I bought several of the same Bosch rotor arms for M30 BMW engines, of which I had several. These were made by Bosch's subsidiary in Spain. The '84 E28 528i I put...
View ArticleRe: RE: [stag] Idle Issue
This is all great info, and ALMOST makes things clear, but I think what we could all use is a good diagram showing the routing of the vacuum and vent lines. I've found diagrams that show the lines...
View ArticleRe: [stag] Cooling
Stuart, When you say the gauge goes up to the 3/4 area do you know for sure that it is overheating? What I mean is have you checked the actual temperature of the engine? These Smiths gauges are not...
View Article[stag] Stag Digest Advertisers: regular posting
For information on how to support the stag-digest with advertising, contact Richard Welty, rwelty@krusty-motorsports.com If you are a subscriber who wishes to help support the list, contributions may...
View ArticlePiston Rings
Slow progress on the engine rebuild has me ready to put the pistons back. I had the machine shop measure and they found that the bores and pistons were still within specs, so I am reusing the original...
View Article[stag] Piston Rings
---- Alistair <EmailWitheld> wrote: > So, my options are: > 1. reuse the rings currently installed - no risk of me breaking a ring! but with somewhat oversize gaps > 2. use the NOS...
View ArticleRe: [stag] Piston Rings
Use B the rings that were there already. Peter H B Sent from Samsung Mobile -------- Original message -------- From: Alistair <EmailWitheld> Date:22/08/2014 19:08 (GMT+00:00) To: stag@digest.net...
View ArticleClik here to view.
Re: Piston Rings
See the table. The maximum gap for the diameter range where the Stag pistons are is 0.024 so you are still less than this. Using gapped oversize rings might work but some have experienced high oil...
View ArticleRe: [stag] Cooling
The FIRST thing I did with my Stag was fit a mechanical VDO temp gauge. As far as I am concerned C/H gauges are useless. How hot is hot? You could be worried about nothing. The full scale (270 or so...
View ArticleRe: [stag] Cooling
I must agree with Ken about the value of installing a mechanical temp gauge. On my SMITHS full scale mechanical gauge I see the temp rising quickly until it stalls at exactly 74 degrees when the...
View ArticleRe: The New Aircraft grade PolyCarbonate Radiator Cowl set
hi Glen, I gave also you an email, Please can I order a full set, including the lower cowl Kind regards, Eddy[/size
View Article
