[stag] Piston Rings

---- Alistair <EmailWitheld> wrote:

> So, my options are:
> 1. reuse the rings currently installed - no risk of me breaking a ring! but with somewhat oversize gaps
> 2. use the NOS Deves rings, with larger than desirable gap
> 3. use County +0.020" rings ground to the right gap

I would go with option 3. Just be certain to get the gap square, clean off any burrs and so on. IMO, compressing the rings by an extra .010" (per side) is not going to change the force enough to worry about.

But I've never tried it myself, so YMMV.

Randall